|
Welcome to Uncle Harry's Nephew's Club Sample Pages, I
certainly hope that you enjoy looking at various appliances being repaired.
Replacing a GE Refrigerator Door Hinge and Cam
|
|
A bad hinge cam causes the door to hang open an inch or clunk as it closes. To replace a bad hinge cam the door must be removed. It is not necessary to remove all of the food from the door. Lay it out
carefully as shown and all the jars etc., except for unsealed liquids, will slide against the door. |
|
Usually the lower hinge and cam are OK and can be reused.
However, in this example a new hinge is also needed. |
|
Here the upper cam is ground away to nothing. |
|
This view shows the upper cam partially installed. |
|
Here is a new lower hinge and cam installed. It is now time to lift up the door and place it on the hinge. The last step is installing the upper hinge and aligning the door. |
You can make a lot of money repairing
appliances. Get your Free Information Kit on starting your own successful appliance repair
business.
Back
|
